Flower Trees UV Printing Ceiling Film Blue Sky Sunny 2018 85 Cherry Blossom Motif Indoor Outdoor Decoration (79''x79'' no Harpoon)

If you want the film to be welded with harpoon. pls contact us and send us your exact ceiling size Film Color: Print as Picture Width maximum: 5 meter Type of Membrane: Translucent Translucent Rate: 50%of lighting can get through the film Working temperature:~30~65 degrees Maximum tensile strength: up to 17Mpa Special Feature:Waterproof Number of pcs: 1 pcs ceiling film （no harpoon welded.）

• [★★★★★]What you buy in this link is a film without harpoon. pls refer to the below installation way [How to install a film without harpoon]
• [Package]:Only 1 piece ceiling film is included. Related accessories like profile and spatula are not included. You can choose the fit size according to the size of your ceiling. Customized/personalized size or shape is acceptable.Feel free to contact us if needed.Pls cut the package carefully when unpacking the carton to avoid breaking the fragile film.
• [How to order a film in this link]: You have to order a bigger length and width than your exact ceiling size so that you can cut the surplus.For example,if your length is between1m and 1.5m, then you choose the given length 1.5m.That is to say,we will send you a pcs of film with the size 1.5m by 2m if your ceiling is like 1.3m by 1.8m
• [How to install a film without harpoon]:For film without harpoon,you have to buy the related profile to install the film, use the related spatula to insert the film directly to the profile. Under this case, we usually make the film bigger than the exact ceiling size so that you can cut the surplus film.
• [What if I need harpoon to be welded around the film]: If you need us to weld the harpoon for you, you have to tell us your exact ceiling size.Usually we make the film a little bit smaller than the ceiling size since the film can be stretched. then you have to buy the aluminum profile to install the film. Use the spatulas to insert the harpoon to the gap in the aluminum profile.
• [About light distance]: Generally speaking, the normal distance between lighting like fluorescent light or led strip is 20~30cm, and the distance between the lighting and film is also 20-30cm. Installer should adjust the distance to avoid any shadow result from this. Lighting should be installed between ceiling and film. 75% of lighting can get through the film.
• [Property]:Stretch ceiling film is flexible and stretchable (hairdryer/air heater needed to heat and soften the film before stretch ); Can be reused for many times（wrinkles made by packing can be removed when air heater or hairdryer heats the film）
• [Film Care]: Use wet towel to wide dust off . When heating the film, do not heat one spot or one part of place intensively. Maintaining a certain of distance (10cm) to warm the film and stretch it when the film is softened.