Maple Spalted Ambrosia Wormy Figured Fiddleback 6.5" x 62" raw Wood Veneer

Spalted Wormy Ambrosia Maple Figured Fiddleback wood veneer 6-1/2" x 62" with no backing raw veneer A grade quality. 1/42" thickness. ONE piece.. Shown in first photo is the actual piece. Not many wormholes in this veneer. Prettier than pictured. Measured from midpoint which is 6.5" one end is 7" and the other is 6". Variation from end to end. Some photos show customer project using same veneer. Ships rolled in corrugated flute and boxed when necessary. Other sizes and backed veneer sheet are available. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995. About pictures : Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness : (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” Phenolic backed veneer = 1/16th"-1/25th" How to cut : generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply : Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish : most any conventional finishing products can be used

• Brand: Spalted Wormy Maple wood veneer sheet raw unbacked, Wood Type: Maple
• Model: Spalted Maple Figured Fiddleback flitch 1/32"-1/42
• Veneer Cut: Plain Sliced
• Item Type: Veneer Sheet